Search

[Daekyung Tech] Coil spring testerQuote Contact_CS@roasexpo.comThis is a testing machine for testing the coil spring used in the high-speed train KTX.Since the springs used in railway use two springs overlapping each other, it is necessary to check the deflection angles of the inner and outer springs and combine them in opposite directions.Daekyung..

[Daekyung Tech] 30MN bridge elastic bearing and LRB composite testerQuote Contact_CS@roasexpo.comIt is a composite structure tester that can test the performance of elastic bearings for bridges,vibration-proof rubber, and LRB for construction...

[Daekyung Tech] Friction wear testerQuote Contact@CS@roasexpo.comIt is a tester that evaluates the abrasion of various materials such as metals and non-metals.Type: program control and measurement, friction coefficient, frictiondistance, friction time storage and outputMeasured friction force: 0 to 20 kgfPressing force: 1.5 Mpa (15.3 kgf)Rotation m..

[Daekyung Tech] Real Load Torque Calibrator (100~200) N.mQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric torque measuring instruments (torque cells).It is a real load torque calibrator with a maximum capacity of 2000 N.m.Equipment supplied to Kia Motors.F2 class weights are used, and clockwise/counterclo..

[Daekyung Tech] Composite mechanical torque correctorQuote Contact_CS@roasexpo.comThis product is a standard instrument for calibrating a torque wrench inspection machine,and it realizes convenience and cost reduction by using vertical and horizontal separation types in one equipment...

[Daekyung Tech] Real load torque calibrator 30kN (special specification)Quote Contact_CS@roasexpo.comIt is a device that can calibrate a torque sensor with an actual load.Maximum measuring capacity: 30 kNA variety of weights are applied to accurately measure torque.Used by the Republic of Korea Army.CAPACITY :  (100, 500, 1,000, 2,000)N.mCONTR..

[Daekyung Tech] Rubber durometer calibratorQuote Contact_CS@roasexpo.comIt is an equipment to check the load of rubber and plastic hardness testers (Shore, A, B, C, D types).This equipment is used for calibration and testing of electric or dial-type rubber durometers,and has the advantage of being easy to use and highly reproducible.CAPACITY : (0 ~..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Real load torque calibrator 100 NMQuote Contact_CS@roasexpo.comIt is a device for correcting torque.The maximum torque is 100 NM, automatically sets the weight, and is designed to measure clockwise/counterclockwise torque.All courses are conducted through Daekyung Tech's dedicated program.The above products are being supplied and us..

[Daekyung Tech] Push-pull gauge calibratorQuote Contact_CS@roasexpo.comThis equipment is used for calibration and testing of electric or dial-type push-pull gauges.CAPACITY :  ( 2 ~ 2,000) NCONTROL : MANUALLOADING : DEAD WEIGHTDEAD WEIGHT : STEEL COATING, F2 GRADEMODE : TENSILE , COMPRESSION..

[Daekyung Tech] Clutch Cover Characteristics TesterQuote Contact_ CS@roasexpo.comThis is a dedicated testing machine for clutch cover characteristics for automobiles.Delivered to SECO.It is a device that obtains results by measuring the operation area and characteristics by applying a load to the release lever and clutch disk.CAPACITY : CLAMPING LO..

[Daekyung Tech] Ball Joint Gap TesterQuote Contact_CS@roasexpo.comAfter checking the gap characteristics of the ball joint,a durability test is performed and the changed characteristics are judged by comparing before and after the test.CAPACITY : ±30 kNRESOLUTION : WITHIN ±0.5%FREQUENCY : 40HzCONTROL : P.C CONTROLSAMPLE : IBJ, OBJMODE : L..

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comDTE-179M- This device is a dust cover durability tester.-It is an equipment for the durability tester of the dust cover, and it uses a computer system to Test samples under environmental conditions using a hydraulic system and chamber controlled by servo valve It was..

[Daekyung Tech] Ball Joint Durability TesterQuote Contact_CS@roasexpo.comThis equipment performs long-term durability tests on vehicle ball joints at specified angles at room temperature, high temperature, and low temperature.After the test, the condition of the ball joint and the condition of the rubber cover are analyzed.At this time, the test ca..

[Daekyung Tech] Handle wear testerQuote Contact@CS@roasexpo.comIt is manufactured according to the MS 625-04 standard and is suitable for the abrasion test of leather handles.The cloth is sprayed with a liquid with a composition similar to human sweat and subjected to a specific load and repeated test.The durability of the handle material is tested..

[Daekyung Tech] Hose Clamp TesterQuote Contact@CS@roasexpo.comThis equipment tests the strength of hose clamps for vehicles.Measure the force by pulling the hose clamp in three directions, equally spaced at 120 degrees.It is a device for measuring the clamping force of "SUS wire clamp" for automobile hoses,and it is a device to measure the force us..

[Daekyung Tech] Hot torsion testing machineQuote Contact_ cs@roasexpo.comIt is manufactured for the purpose of researching and developing the deformation and, characteristics of materials by rapidly heating various round and wire rods to high temperature and rotating them at high speed.CAPACITY : 200 kN.mACCURACY : WITHIN ± 1%TABLE : X AXIS SL..

[Daekyung Tech] Bottle cap torque testerQuote Contact_cs@roasexpo.comThis is a tester that measures the torque generated when the bottle cap is opened.Data is displayed in units such as Nm, Ibf.in, etc., and test results are automatically saved in the desired folder.Up to 2 liter bottles can be tested, and samples from 12 to 24 can be adjusted acco..

[Daekyung Tech] Flame retardant tester (horizontal type)Quote inquiry_ CS@roasexpo.comThis tester is designed and manufactured in accordance with KS and UL standards for the purpose of inspecting the flame retardancy and, combustibility of specimens by controlling and applying the prescribed flame to specimens such as various wires, plastics, and f..

[Daekyung Tech] Flame retardant tester (vertical type)Quote inquiry_ CS@roasexpo.comManufactured in accordance with KS and UL standards as well as test methods for combustibility of automobile interior materials,electric wires, and plastic materials.TYPE : VERTICALBURNER : BUTSENGAS : BUTANEINNER MATERIAL : STS 304OUTER MATERIAL : SS41 COATINGIGNIT..

[Daekyung Tech] Oil resistance testerQuote inquiry_ CS@roasexpo.comThis tester is a device that inspects physical properties by heating a specimen while stirring it at a high temperature in oil.Since it consists of 4 test tubes, 4 samples can be measured at the same time...

[Daekyung Tech] Rupture TesterQuote Contact_cs @roasexpo.comDeformation or pass/fail of a product is judged for the purpose of rupturing the metal or non-metal pipe of a vehicle under high pressure or testing the durability or characteristics up to the target pressure.CAPACITY : (10 ~ 200) Mpa (100 ~ 2000 kgf / ㎠ )DETECTOR : HYD. CYLINDERPRESS..

 [Dekyung Tech] Paper specimen cutting machineQuote Contact_ cs@roasexpo.comSpecimen maker V capable of cutting specimens for tensile testing and link rush compression..

[Daekyung Tech] Cord creep testerQuote Contact_cs@roasexpo.comIt is an equipment manufactured for the purpose of performing a creep test by inserting a tire cord in the form of a rubber and molded belt for a specified time with a constant load and temperature...

[Daekyung Tech] Flexural Vibration TesterQuote Contact_cs@roasexpo.comBy giving bending and vibration due to fatigue of the plastic pipe material for sewage pipe,the product is judged pass/fail based on whether it is cracked or damaged. It is easy to use and has the advantage of high reproducibility.CAPACITY : 10 kNMODE : FORCE CYCLE, VIBRATION TES..